Search by Title only
Home > Features of your vehicle > Trip Computer > Trip information (Trip computer) (For Type A cluster)

Trip information (Trip computer) (For Type A cluster)

The trip computer is a microcomputer-controlled driver information system that displays information related to driving.

NOTICE

Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.

Trip Modes

To change the trip mode, press the TRIP button.

Trip A/B

Tripmeter (1)
  • The tripmeter is the total driving distance since the last tripmeter reset.

    • Distance range : 0.0 ~ 9999.9 km or mi.

  • To reset the tripmeter, press the RESET button on the steering wheel for more than 1 second when the tripmeter is displayed.

Elapsed Time (2)
  • The elapsed time is the total driving time since the last elapsed time reset.

    • Time range (hh:mm) : 00:00 ~ 99:59

  • To reset the elapsed time, press the RESET button on the steering wheel for more than 1 second when the elapsed time is displayed.

NOTICE

Even if the vehicle is not in motion, the elapsed time keeps going while the engine is running.

Average Vehicle Speed (3)
  • The average vehicle speed is calculated by the total driving distance and driving time since the last average vehicle speed reset.

    • Speed range : 0 ~ 999 km/h or mph

  • To reset the average vehicle speed, press the RESET button on the steering wheel for more than 1 second when the average vehicle speed is displayed.

NOTICE
  • The average vehicle speed is not displayed if the driving distance is less than 300 meters (0.19 miles) or the driving time is less than 10 seconds since the ignition switch or the ENGINE START/STOP button is turned to ON.

  • Even if the vehicle is not in motion, the average vehicle speed keeps going while the engine is running.

Fuel Economy

Average Fuel Economy (1)
  • The average fuel economy is calculated by the total driving distance and fuel consumption since the last average fuel economy reset.

    • Fuel economy range: 0 ~ 99.9 L/100km, km/L or MPG

  • To clear the average fuel economy manually, press the RESET button on the steering wheel for more than 1 second when the average fuel economy is displayed.

NOTICE

The average fuel economy is not displayed for more accurate calculation if the vehicle does not drive more than 10 seconds or 300 meters (0.19 miles) since the ignition switch or ENGINE START/STOP button is turned to ON.

Instant Fuel Economy (2)
  • This mode displays the instant fuel economy during the last few seconds when the vehicle speed is more than 8 km/h (5 MPH).

    • Fuel economy range: 0.0 ~ 30 L/100km, km/L or 0.0 ~ 50.0 MPG

To change the Fuel Economy unit (km/L ↔ L/100km)

Press the TRIP button for 5 seconds, the Fuel Economy unit is blink. And then press the RESET button, the Fuel Economy unit is changed. Press the TRIP button for more than one second.

Service Reminder (if equipped)

If the remaining mileage or time reaches 1,500 km (900 miles) or 30 days, the service symbol () will blink for several seconds each time you set the ignition switch or ENGINE STRAT/STOP button to the ON position.

If you exceed the specified service interval, the service symbol () will blink each time you turn ON the vehicle.

If the service interval is not set, the service symbol () will not be displayed.

NOTICE

If it is not available to set service interval on your vehicle, have the system serviced by a professional workshop. Kia recommends to consult an authorized Kia dealer/service partner.

Digital speedometer

This mode displays the current speed of the vehicle.

Digital speed ON/OFF mode

Switch to Digital speed mode using the trip switch in Trip mode, and press and hold the RESET button for more than 1 second. Then it will be switched from SPEED ON to SPEED OFF or the other way around.