Windshield defrosting and defogging

Windshield heating
Do not use the or
position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and
the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the
mode selection to the
position and fan speed control to the lower speed.
-
For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed.
-
If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position.
-
Before driving, clear all snow and ice from the windshield, rear window, outside rear view mirrors, and all side windows.
-
Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield.
- Contains Topics
- Defogging inside windshield with manual climate control system
- Defrosting outside windshield with manual climate control system
- Defogging inside windshield with automatic climate control
- Defrosting outside windshield with automatic climate control
- Auto defogging system (only for automatic climate control system)
- Sunroof inside air recirculation
- Automatic Air Ventilation
- Activate upon Washer Fluid Use
- Recirculation Mode Plus
- Defroster
- Defogging logic