Blind-Spot Collision Warning settings
Blind-Spot Safety

With the ignition switch or ENGINE START/STOP button in the ON position, select or deselect “User Settings (LCD display) → Driver Assistance → Blind-Spot Safety” to set whether or not to use each function.
If ‘Warning Only’ is selected, the function will warn the driver with a warning message, an audible warning and steering wheel vibration (if equipped) depending on the collision risk levels.

When the engine is restarted with Blind-Spot Collision Warning off, the ‘Blind-Spot Safety System is Off’ message will appear on the cluster.
If you change the setting from ‘Off’ to ‘Warning Only’, the warning light on the outside rearview mirror will blink for three seconds.
In addition, if the engine is turned on, when Blind-Spot Collision Warning is set to ‘Warning Only’, the warning light on the outside rearview mirror will blink for three seconds.

-
If 'Warning Only' is selected, steering is not assisted.
-
If ‘Off’ is selected, the driver should always be aware of the surroundings and drive safely.

If the engine is restarted, Blind-Spot Collision Warning will maintain the last setting.
Warning Timing

With the ignition switch or ENGINE START/STOP button in the ON position, select ‘Driver Assistance → Warning Timing’ from the 'User Settings (LCD display)' to change the initial warning activation time for Blind-Spot Collision Warning.
When the vehicle is first delivered, Warning Timing is set to ‘Normal’. If you change the Warning Timing, the warning time of other Driver Assistance system may change.

-
The setting of the Warning Timing applies to all functions of Forward Collision-Avoidance Assist.
-
Even though 'Normal' is selected for Warning Timing, if the front vehicle suddenly stops, the initial warning activation time may seem late.
-
Select 'Late' for Warning Timing when traffic is light and when driving speed is slow.

If the engine is restarted, Warning Timing will maintain the last setting.
Warning Volume

With the ignition switch or ENGINE START/STOP button in the ON position, select ‘Driver Assistance → Warning Volume’ from the 'User Settings (LCD display)' to change the Warning Volume to ‘High’, ‘Medium’, ‘Low’ for Blind-Spot Collision Warning.
If you change the Warning Volume, the warning volume of other Driver Assistance system may change.

-
The setting of the Warning Timing and Warning Volume applies to all functions of Blind-Spot Collision Warning.
-
Even though ‘Normal’ is selected for Warning Timing, if the vehicles approaches at high speed, the initial warning activation time may seem late.
-
Select ‘Late’ for Warning Timing when traffic is light and when driving speed is slow.

If your vehicle is equipped with additional Infotainment System, please scan the QR code in a separately supplied Car Infotainment System Quick Reference Guide.