Be aware of the precautions below to prevent accidents.

• If V2L charging has stopped before the vehicle is charged, it may be because the system has overheated. Check whether the V2L connector, charging port or power plug are contaminated, worn, corroded or broken or if the vehicle is drawing 16 amps. When the temperature falls to normal levels, you can use it again. (Use only compatible appliances.)

• Do not modify or disassemble the provided V2L connector. The failure caused by modifying or disassembling is not covered by the warranty.

• Do not drop the V2L connector or give a strong impact to it.

• Do not drop or hit the V2L connector.

• Be sure to disconnect the V2L connector from the vehicle when you are finished using V2L.

• When the high voltage battery charge reaches the set discharging limit (%), the operation stops, and a warning message is displayed on the instrument cluster. If you want V2L operation, set the discharging limit (%) lower than the current battery charge.

• When using various electric appliances, use them below the maximum power capacity that can be supplied by the vehicle.

• If you use an electrical appliance that exceeds the maximum power capacity that the vehicle can supply, the operation will stop and a warning message will be displayed on the instrument cluster. Make sure the total power consumption of the electrical appliance you use does not exceed the V2L maximum power capacity.

• Some of the electric appliances may not operate normally even if the appliance has power consumption less than the maximum power capacity provided by the vehicle when:

  • Electrical appliances that require high power during initial operation.

  • Measuring devices that need to process accurate data.

  • Electric appliances sensitive to inverter type AC power supply.

• Do not use appliances that require a continuous power supply, such as medical equipment. The power supply may be interrupted depending on the vehicle's condition.

• Only use compatible appliances under 16 ampere.

• Insert the power plug in fully and do not use plugs that are worn, corroded or broken, not meeting the standard. An electric shock or malfunction may occur.

• Use the power plug with a ground connection.

• Do not use high powered home appliances such as an air conditioner, washing machine or dryer.

• Do not hang home appliances on the V2L charging cable.

• For various devices connected to a power outlet, use only appliances that have obtained national safety certification. For usage and precautions, refer to the manual of the device. (Electrical appliances, multi-outlets, cord extension cables, etc.)

• For electronic devices that are used outdoors in a vehicle, use a appliance with a waterproof function or use it in a waterproof environment. Do not use in environments with rain or high humidity. (Electrical appliances, multi-outlets, cord extension cables, etc.)

• If there is a risk of lightning, do not use the V2L function outdoors.

• Do not connect portable outlets.

• Make sure the extension cable is not twisted. It may cause a fire.

• When using the V2L, power is also supplied to the vehicle's interior power outlet. Unplug electrical appliances that are not in use from the indoor power outlet.

• When using the V2L, the cooling fan in the vehicle motor compartment can operate automatically even if the vehicle is turned off. Do not put your hand near the cooling fan in the V2L operating state.

• Please connect the V2L connector to the charging hole within 60 seconds after the charging cover opens. To prevent theft after connecting, it is changed to auto lock automatically so that it is difficult to separate.

• V2L discharging mode will shut off if the vehicle is turned off using the interior V2L.

• Opening the charging door or connecting the V2L connector to the charging inlet, the V2L discharging mode will shut off. If you want to use the interior and exterior V2L simultaneously, first connect the V2L connector to the charging inlet and use the indoor V2L.