Mechanical key
Press the front part (1) of the door handle to pull out the rear part of the door handle. While keep pressing the front part of the door handle, insert the mechanical key (2) to the lock with the key handle facing the ground as shown.
To lock the door, turn the key toward the front (left side) of the vehicle. To unlock, turn the key toward the rear (right side) of the vehicle.
Do not apply excessive force on the door and door handle. It may damage the door and door handle.
Do not apply excessive force on the door and door handle. It may damage the door and door handle.
The mechanical key only locks/unlocks the driver's door handle. For more details, refer to 'In case of an emergency' in this chapter.
How to remove ice from door handles
In extreme winter conditions, the door handle may not open due to icing inside the door handle. You can usually use the bottom of your fist to tap the door handle a few times to remove the ice.
-
Remove icing by tapping the door handle using the bottom of your fist in a circular pattern along the perimeter of the door handle.
OCV041637N -
If necessary, increase the intensity of tapping to remove ice, and repeat until the door handle protrudes when unlocking the door.
-
When the door handle protrudes and can be pulled, open and close a few times to remove any icing residue.
-
Before performing this procedure, remove any jewelry or objects that could damage the paintwork and do not attempt to use tools or excessive force.
-
Do not hit the vehicle too hard as dents may occur. You should use a force similar to knocking on your neighbor's door.