Resetting memory positions

If the Driver position memory system does not work properly, initialize the system as follows:

Resetting integrated memory system

  1. Stop the vehicle and open the driver's door with the EV button in the ON position and the vehicle shifted to P (Park).

  2. Adjust the driver's seat and seatback to the foremost position.

  3. Press the memory button 1 (or 2) and push forward the driver's seat movement switch over 2 seconds simultaneously.

While resetting integrated memory system

  1. Resetting starts with a notification sound.

  2. The driver's seat and seatback is adjusted to the rearward position with the notification sound.

  3. The driver's seat and seatback is re-adjusted to the default position (central position) with the notification sound.

However, in the following cases, the resetting procedure and the notification sound may stop.

  • The memory button is pressed.

  • The seat control switch is operated.

  • The gear is shifted out of P (Park).

  • The driving speed exceeds 2 mph (3 km/h).

  • The driver's door is closed.

NOTE

  • While integrated memory system is being reset, if the resetting and notification sound stops incompletely, restart the resetting procedure again.

  • Make sure that there is no objects around the driver's seat in advance of resetting the integrated memory system.

  • After resetting the integrated memory system, the adjustment for the driver seat must be stored again to recall the memory position.