Operating order

1. Getting ready for parking

With the vehicle turned on, depress the brake pedal and shift the gear to D (Drive) or N (Neutral).
Press and hold the Parking/View ( ) button to turn on Remote Smart Parking Assist.

NOTE

Agree must be selected on the infotainment system screen and the infotainment system has to operate properly to use Parking function.
If you drive above 3 mph (5 km/h) with the vehicle on, you may use the Parking function with the gear shifted to N (Neutral).

2. Searching for parking space

A: Searching for parking space...

Slowly drive forward (below 12 mph).

Slowly drive forward maintaining the distance of approximately 40 inches (100 cm) from the parked vehicles. The vehicle will search for a parking space from the side or front/rear of parked vehicle.

When searching for a parking space is complete, a message will appear on the infotainment system screen. Select parking type will be displayed and the selected parking space will appear on Top View screen of Surround View Monitor.

NOTE

Remote Smart Parking Assist searches for parking spaces that are next to parked vehicles, or parking spaces with parked vehicles in front or rear.
While searching for a parking space, when vehicle speed is above 12 mph (20 km/h), a message will appear on the infotainment system screen informing you to slow down. When vehicle speed is above 18 mph (30 km/h), Parking function will turn off.
Searching for a parking space will be completed when there is enough space to move the vehicle in addition to the parking space.
Even if an audible sound is heard to notify that searching for a parking space is complete, search completion can be canceled immediately depending on surroundings.

NOTE

If the distance is below 20 inches (50 cm) or over 59 inches (150 cm), Remote Smart Parking Assist may not be able to search for a parking space.

OCV052093N

[A]: Searching for parking space
If you do not maintain a certain distance from the parked vehicle, the performance to search for a parking space may reduce.
Even if a diagonal parking space is searched as a parking space, parking is not assisted normally.
Due to abnormal performance of the ultrasonic sensor or the influence of the surroundings, Parking function may not be able to search for a parking space even if there is a parking space, or may search for a space that is not suitable for parking.

3. Select parking type and operating mode

1. Parking type – Perpendicular reverse (Left/Right), Parallel reverse (Left/Right)

A: Select parking type

Parking type can only be selected at standstill.

With the vehicle stopped by depressing the brake pedal, touch the infotainment system screen to select the desired parking type.

NOTE

If you continue to drive without stopping after the parking type selection screen appears, Remote Smart Parking Assist will return to the previous stage and search for a parking space.
If Parking function is canceled unintentionally by pressing the Parking/View ( ) button before the parking type is selected, you can return to the parking type selection stage by pressing and holding the button again while the vehicle is stopped.

WARNING

Before selecting the Parking type, the driver should check whether the parking space is suitable.

If the searched parking space by Remote Smart Parking Assist is narrow or unsuitable for parking, do not select the Parking type and move the vehicle to search for another parking space.

2. Operating mode – Remote Parking, Smart Parking

A: Operation guide

REMOTE Parking
SMART Parking

After selecting a parking type, the infotainment system screen will guide you with Remote Smart Parking function and Smart Parking function. Follow the instructions to operate Remote Smart Parking Assist.

NOTE

Operating instructions will be displayed on the screen for each desired function you select.
Do not take your foot off the brake pedal during the Parking function guide. When the vehicle moves, Remote Smart Parking Assist will turn off.

NOTE

A: SMART Parking

Take hands off steering wheel.
Press and hold PARKING button.

If Remote Smart Parking Assist cannot activate Remote Smart Parking function, only the Smart Parking guide will be displayed on the infotainment system screen.

4. Smart Parking

Press the Parking/View ( ) button when the vehicle is stopped by depressing the brake pedal.
Release the brake pedal while holding the Parking/View ( ) button.
- Remote Smart Parking Assist will automatically control the steering wheel, vehicle speed and gear shift.
- If you do not hold down the Parking/View button, the vehicle will stop and function control will pause. The function will start operating again when the Parking/View button is pressed and held again.
Hold the Parking/View ( ) button until the vehicle reaches the target parking position.
- Message will appear on the infotainment system screen to inform you that parking is complete. The vehicle will automatically shift to P (Park) and engage the parking brake.
If you need to change the vehicle's position or location, manually complete parking your vehicle.

NOTE

Smart Parking function will not operate if the door is open or the seat belt is not fastened.
The parking location indicator is displayed on Surround View Monitor screen and is displayed until the vehicle enters the parking space for the first time by Smart Parking function.
Vehicle speed can be adjusted by depressing the brake pedal while Smart Parking function is operating. However, the vehicle does not accelerate even when the accelerator pedal is depressed.
Depending on parking environments, if the vehicle is stopped by a stopper, parking may be completed.

5. Remote Smart Parking

A: REMOTE Parking

1. Unfasten driver's seat belt.
2. Leave car (keep the key) and close doors.
3. Press and hold PARKING button on car key.

Shift the gear to P (Park).
Get out of the vehicle with the smart key, and close all doors.
Press and hold one of the Forward ( ) or Backward ( ) button on the smart key.
- Remote Smart Parking Assist will automatically control the steering wheel, vehicle speed and gear shift.
- If you do not hold down the Forward ( ) or Backward ( ) button, the vehicle will stop and function control will pause. The function will start operating again when the button is pressed and held again.
Hold the Forward ( ) or Backward ( ) button on the smart key until the parking is complete.
- When the vehicle reaches the target parking position, a message will appear on the infotainment system screen to inform you that parking is complete. The vehicle will automatically shift to P (Park), engage EPB (Electronic Parking Brake) and the vehicle will turn off.
If you need to change the vehicle's position or location, manually complete parking your vehicle.

NOTE

When operating Remote Smart Parking function, make sure all smart keys are outside of the vehicle.
Remote Smart Parking function will operate only when the smart key is within 13 ft. (4 m) from the vehicle. If there is no vehicle movement even when the Remote Forward or Backward button is pressed on the smart key, check the distance to the vehicle and press the button again.
The detecting range of the smart key may vary depending on the surroundings that are affected by radio waves such as transmission tower, broadcast station, etc.
The parking location indicator is displayed on Surround View Monitor screen and is displayed until the vehicle enters the parking space for the first time by Remote Smart Parking function.
Depending on parking environments, if the vehicle is stopped by a stopper, parking may be completed.

WARNING

When using Remote Smart Parking function, make sure that all passengers have gotten out of the vehicle.
After ending or turning off Remote Smart Parking function, before leaving the vehicle, close windows and sunroof, and make sure the vehicle is off before locking the doors.

Smart Parking function


Operation status	Turn signal
Under control	The turn signal of the parking direction blinks until the first reverse is complete.


Operation status	Smart key LED	Hazard warning light	Turn signal
Under control	Green LED continuously blinks	-	The turn signal of the parking direction blinks until the first reverse is complete.
Pause	Red LED continuously blinks	Blinks	-
Off	Red LED appears for 4 seconds and then turns off	Blinks 3 times and turns off	-
Complete	Green LED appears for 4 seconds and then turns off	Blinks 1 time and turns off	-

NOTE

Operation status by the hazard warning light may not be applicable based on the regulation of your country.
If the smart key is not within the operating range from the vehicle (approximately 13 ft. (4 m)), the smart key LED will not appear or blink. Use the smart key within the operating range.