Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Consider the range of temperature your vehicle will be operated in before the next oil change.

CAUTION

Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

NOTICE

Never add any additives to the engine oil. Engine oil additives can change its properties and may cause engine failure.

Temperature Range for SAE Viscosity Numbers

(Gasoline) 1.6 MPI

A: Except Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan, India, Europe

B: For Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan, India

C: For Europe

(Gasoline) 2.0 MPI

A: For Central & South America, Brazil, China

B: For Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan, India

C: Except Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan, India, Central & South America, Brazil, China

An engine oil displaying this American Petroleum Institute (API) Certification Mark conforms to the International Lubricant Specification Advisory Committee (ILSAC). It is recommended to only use engine oils that uphold this API Certification Mark.