Search by Title only
Home > Features of your vehicle > Bonnet > Opening the bonnet

Opening the bonnet

1
Pull the release lever to unlatch the bonnet. The bonnet should pop open slightly.
WARNING

Open the bonnet after turning off the engine on a flat surface, shifting the gear to the P (Park) position and setting the parking brake.

2
Go to the front of the vehicle, raise the bonnet slightly, push the secondary latch (1) up side and lift the bonnet (2).
3
Pull out the support rod.
4
Hold the bonnet opened with the support rod.
WARNING

Support rod

  • After driving, the engine compartment and support rod will be hot. Grasp the support rod in the area wrapped in rubber to prevent burns.

  • The support rod must be inserted completely into the hole provided whenever you inspect the engine compartment. This will prevent the bonnet from falling and possibly injuring you.