Rear Cross-Traffic Collision Warning operation
Warning and control
Rear Cross-Traffic Safety will warning the driver when a collision is imminent.
Collision warning
To warning the driver of an approaching vehicle from the rear left/right side of your vehicle, the outside rearview mirror will blink and a warning will appear on the cluster. At the same time, an audible warning will sound. If the Rear View Monitor system is operating, a warning will also appear on the infotainment screen.
Rear Cross-Traffic Collision Warning will operate when the following conditions are satisfied:
-
Your vehicle gear is shifted to R (Reverse)
-
Your vehicle speed is below 8 km/h (5 mph)
-
The approaching vehicle is within approximately 25 m (82 feet) from the left and right side of your vehicle
-
The speed of the vehicle approaching from the left and right is above 5 km/h (3 mph)
If the operating conditions are satisfied, there will be a warning whenever the vehicle approaches from the left or right side even though your vehicle speed is 0 km/h (0 mph).
-
Take the following precautions when using Rear Cross-Traffic Safety:
-
For your safety, change the Settings after parking the vehicle at a safe location.
-
If any other system's warning message is displayed or audible warning is generated, Rear Cross-Traffic Safety warning message may not be displayed and audible warning may not be generated.
-
You may not hear the warning sound of Rear Cross-Traffic Safety if the surrounding is noisy.
-
Rear Cross-Traffic Safety may warn the driver late or may not warn the driver depending on the road and driving conditions.
-
The driver should hold the responsibility to control the vehicle. Do not solely depend on Rear Cross-Traffic Safety. Rather, maintain a safe braking distance, and if necessary, depress the brake pedal to reduce driving speed or to stop the vehicle.