Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in your vehicle.
|
Lubricant |
Volume |
Classification |
||
|---|---|---|---|---|
|
Engine oil*1*2 (drain and refill)  |
(Gasoline) 1.0 MPI/1.0 FFV |
3.0 l (3.17 US qt.) |
For Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt |
API Latest or ACEA A5/B5 |
|
Except Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt |
API Latest (ILSAC Latest) or ACEA C5 |
|||
|
(Gasoline) 1.2 MPI |
3.5 l (3.7 US qt.) |
For Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt |
API Latest or ACEA A5/B5 |
|
|
Except Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt |
API Latest (ILSAC Latest) or ACEA C5 |
|||
|
Smartstream G1.0 T-GDi |
3.6 l (3.8 US qt.) |
For Middle east, Iran, Libia, Algeria, Sudan,Morocco, Tunisia, Egypt |
API Latest or ACEA A5/B5 |
|
|
Except Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt |
API SN PLUS/SP or ILSAC GF-6 |
|||
|
Smartstream G1.0 |
3.1 l (3.3 US qt.) |
For Middle east, Iran, Libia, Algeria, Sudan,Morocco, Tunisia, Egypt |
API Latest or ACEA A5/B5 |
|
|
Except Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt |
API SN PLUS/SP or ILSAC GF-6 |
|||
|
Smartstream G1.2 |
3.4 l (3.6 US qt.) |
For Middle east, Iran, Libia, Algeria, Sudan,Morocco, Tunisia, Egypt |
API Latest or ACEA A5/B5 |
|
|
Except Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt |
API SN PLUS/SP or ILSAC GF-6 |
|||
|
Manual transmission fluid |
(Gasoline) 1.0 MPI/1.0 FFV/1.2 MPI |
1.3~1.4 l (1.4 ~ 1.5 US qt.) |
API GL-4, SAE 70W- HK SYN MTF 70W- SPIRAX S6 GHME 70W MTF- GS MTF HD 70W |
|
|
Smartstream G1.0 T-GDi |
1.6~1.7 l (1.7 ~ 1.8 US qt.) |
|||
|
Smartstream G1.0 |
1.3~1.4 l(1.4 ~ 1.5 US qt.) |
|||
|
Smartstream G1.2 |
||||
|
Automated manual transmission |
Smartstream G1.0 |
1.3~1.4 l(1.4 ~ 1.5 US qt.) |
API GL-4, SAE 70W- HK SYN MTF 70W- SPIRAX S6 GHME 70W MTF- GS MTF HD 70W |
|
|
Smartstream G1.2 |
||||
|
Automatic transmission fluid |
(Gasoline) 1.0 MPI/1.0 FFV |
5.7 l ( 6.02 US qt.) |
ATF SP-III (Recommended DIAMOND, SK) |
|
|
(Gasoline) 1.2 MPI |
6.1 l ( 6.45 US qt.) |
|||
|
Smartstream G1.0 |
5.7 l ( 6.02 US qt.) |
|||
|
Coolant |
(Gasoline) 1.0 MPI/1.0 FFV |
5.0 l (5.28 US qt.) |
Mixture of antifreeze and water(Ethylene glycol base coolant for aluminum radiator) |
|
|
(Gasoline) 1.2 MPI |
5.5 l (5.81 US qt.) |
|||
|
Smartstream G1.0 T-GDi |
5.7 l (6.02 US qt.) |
|||
|
Smartstream G1.0 |
5.2 l (5.50 US qt.) |
|||
|
Smartstream G1.2 |
5.4 l (5.70 US qt.) |
|||
|
Brake / clutch fluid*3 |
0.4 ~ 0.44 l (0.42 ~ 0.46 US qt.) |
SAE J1704 DOT-4 LV, ISO4925 CLASS-6, FMVSS116 DOT-4 |
||
|
Fuel |
35 l (9.24 US gal.) |
- |
||
|
Fuel (FFV) |
Gasolinereservoir |
0.8 l (0.2 US gal.) |
- |
|
|
Aclohol |
38 l (10.03 US gal.) |
- |
||
*1. : Refer to the recommended SAE viscosity numbers on the next page.
*2. : If the above recommended specification oil is not available, SAE 0W-20 grade synthetic oil can be used. (Except Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt, Central & South America)
*3. : To maintain your vehicle’s best brake and ABS/ESC performance, use Kia genuine brake fluid as in the specification.
Recommended SAE viscosity number
Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage.
When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.
(Gasoline) 1.0 MPI/1.0 FFV/1.2 MPI
|
Temperature Range for SAE Viscosity Numbers |
||
|---|---|---|
|
Temperature |
°C |
 |
|
°F |
 |
|
|
Gasoline Engine Oil |
B*1 |
 |
 |
||
 |
||
 |
||
|
C*1 |
|
|
|
|
||
|
|
||
 |
||
*1: Except Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt - If the above recommended specification oil is not available, SAE 0W-20 grade synthetic oil can be used. If mineral oil or semi-synthetic oil is used, it is a severe maintenance condition in terms of engine oil change.
*2: For Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt - If the above recommended specification oil is not available, SAE 5W-30 grade synthetic oil can be used. If mineral oil or semi-synthetic oil is used, it is a severe maintenance condition in terms of engine oil change.
Smartstream G1.0 T-GDi/Smartstream G1.0/Smartstream G1.2
|
Temperature Range for SAE Viscosity Numbers |
||
|---|---|---|
|
Temperature |
°C |
|
|
°F |
|
|
|
GasolineEngine Oil |
B*1 |
 |
|
C*2 |
|
|
|
|
||
|
|
||
|
|
||
*1: Except Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt - If the engine above recommended specification oil is not available, SAE 0W-20 grade synthetic oil can be used. If mineral oil or semi-synthetic oil is used, it is a severe maintenance condition in terms of engine oil change.
*2: For Middle east, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt - If the above recommended specification oil is not available, SAE 5W-30 grade synthetic oil can be used. If mineral oil or semi-synthetic oil is used, it is a severe maintenance condition in terms of engine oil change.