Auto defogging for automatic climate control 
(if equipped)
Operation
-
The Auto Defogging System will be enabled as follows:
-
The A/C button will turn ON.
-
The air intake control will change to fresh mode under low outside temperature.
-
The mode will be changed to defrost to direct the airflow to the windscreen.
-
The fan speed will be increased.
-
Operating condition(s)
-
When the heater or air conditioning is on.
-
A high amount of humidity is detected in the vehicle.
Cancelling or resetting auto defogging
Operation
-
Press (
) for 3 seconds.
-
The button indicator will blink 3 times if cancelled.
-
The button indicator will blink 6 times if reset.
-
-
When the air conditioning is turned on by Auto defogging system, if you try to turn off the air conditioning, the air conditioning will not be turned off.
-
To maintain the effectiveness and efficiency of the Auto Defogging System, do not select Recirculation mode whilst the system is operating.
-
When the Auto Defogging System is operating, the fan speed adjustment knob, the temperature adjustment knob, and the air intake control button are all disabled.
-
Do not remove the sensor cover located on the upper end of the windscreen glass.
Damage to system parts could occur and may not be covered by your vehicle warranty.