Utility information view
LCD displays |
Displayed contents |
---|---|
![]() OSV034118L |
|
![]() OSV034110L |
The driver's door is opened after turning off the vehicle or the vehicle is turned on after 3 minutes have passed, the Drive Info screen will reset. |
![]() OSV034111L |
The information after recharging. To manually reset the information, press and hold the OK button when viewing the After Recharging. |
![]() OSV034112L |
The information is accumulated starting from the last reset. To manually reset the information, press and hold the OK button when viewing the Accumulated Info. |
![]() OSV034154L |
|
![]() OSV034155L |
This mode informs you of the following situations:
At this time, a Master Warning icon (
|
![]() OMV033029L |
At this time, a Master Warning icon (
This mode informs you of the following situations:
|
![]() OSV034196L |
The Range guide helps drivers achieve economic driving. The Distance to empty (2) is determined by analyzing historical driving data and the current battery charge status. The 'estimated distance to empty' is calculated based on the measured energy consumption since the start of this trip and the remaining battery. The energy-saving level for this trip is visually indicated with a green or orange bar (4). The length of the bar is proportional to the degree of energy-saving.
|
-
The vehicle must be driven for a minimum of 300 meters (0.19 miles) since the last cycle before the accumulated driving information is recalculated.
-
The average energy economy is not displayed for more accurate calculation if the vehicle does not drive more than 10 seconds or 50 meters (0.03 miles) since the EV button is turned to ON.
-
Range guide
-
The energy consumption gauge displays bars after calculating the current trip's efficiency and driving a certain distance.
-
This function offers extra data to help drivers achieve energy consumption driving. However, please keep in mind that its effectiveness may differ depending on various traffic conditions and road environments, such as traffic jams, inclines, declines, or curved roads. It is important to always take into account real-time driving conditions, including the distance between your car and the ones in front and behind you as you drive.
-