Charging status indicator lamp for portable charger

OMV013024L

Indicator

Details

POWER

On: Power on

CHARGE

On: Charge Blink: Current limit due to high plug temperature or high internal temperature

FAULT

Blink: Charging interrupted

CHARGE LEVEL

12

12 A

10

10 A

08

8 A

06

6 A

Status

Details

Status/Diagnosis/Countermeasure

  • Charging connector plugged into vehicle ( POWER Green ON)

  • Plug connected to an electric outlet ( POWER Green ON)

Whilst charging

  • Charge indicator ( POWER Green ON/ CHARGE Blue ON)

  • Charging current

Before plugging charging connector into vehicle ( POWER Green ON, FAULT Red blink)

  • Abnormal temperature

  • CCB (In-Cable Control Box) failure

Plugged into vehicle ( POWER Green ON, FAULT Red Blink)

  • Diagnostic device failure

  • Current leakage

  • Abnormal temperature

Leakage current failure ( POWER Green ON, FAULT Red Blink)

  • After disconnecting and reconnecting the power plug, press and release the button for 2 seconds or longer to clear the error.

Power saving mode

  • Charge level indicator is turned off if there is no status change for more than 1 minute.
TIP

The charging current changes whenever the button (1) is pressed for less than 1 sec with the charger plugged into an electrical outlet but not the vehicle.