Turning on Highway Lane Change Assist

Warning message: Press OK button to enable Lane Change Assist

Whilst Highway Lane Change Assist function is on, the function will be ready to operate when all the following conditions are satisfied:

  • Highway Driving Assist is operating

  • Lane Following Assist is operating

  • A vehicle in the rear area of your vehicle is detected more than once after the vehicle is turned on

  • Your vehicle speed is

    • Australia: 60 km/h (40 mph)

    • Europe: 75 km/h (45 mph)

  • Hands-off warning is not displayed on the cluster

  • Hazard warning flasher is off

NOTE

  • Whilst Lane Change Assist function is turned on (indicator on), Lane Following Assist will not cancel even if the turn signal indicator or hazard warning flasher is operating.

  • Lane Change Assist function turns off automatically when driven in the following road conditions:

    • One driving lane

    • A road with no structure, such as a medium strip, guardrails, etc.

    • There is a pedestrian or cyclist on the road ahead

  • When the function is in the ready state, and vehicle speed is below 75 km/h (45 mph), the function will change to the standby state.

    • Australia: 55 km/h (35 mph)

    • Europe: 75 km/h (45 mph)

  • The images or colours may be displayed differently depending on the specifications of the instrument cluster or theme.

WARNING

When Highway Lane Change Assist function turns off whilst operating, steering assist will be temporarily cancelled. Always be cautious whilst driving.