Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in your vehicle.
|
Lubricant |
Volume |
Classification |
||
|---|---|---|---|---|
|
Engine oil*1*2 (drain and refill)  |
Smartstream G1.0 T-GDi |
3.6 l (3.8 US qt.) |
SAE 0W20, API SN PLUS/SP or ILSAC GF-6 *3 SAE 5W30, API LATEST or ACEA A5/B5 *4 |
|
|
Smartstream G1.0 T-GDi 48V HEV |
||||
|
Smartstream G1.2 |
3.4 l (3.6 US qt.) |
|||
|
(Petrol engine) 1.4 MPI |
3.5 l (3.7 US qt.) |
SAE 0W20, API LATEST or ACEA C5 *3 SAE 5W30, API LATEST or ACEA A5/B5 *4 |
||
|
Manualtransmission fluid |
Smartstream G1.2 |
1.3 ~ 1.4 l (1.4 ~ 1.5 US qt.) |
API GL-4, SAE 70W - SK : HK SYN MTF 70W - H.K.SHELL : SPIRAX S6 GHME 70W MTF - GS CALTEX : GS MTF HD 70W |
|
|
Smartstream G1.0 T-GDi |
1.5~1.6 l (1.6~1.7 US qt.) |
|||
|
(Petrol engine) 1.4 MPI |
||||
|
Automatic transmission fluid |
(Petrol engine) 1.4 MPI |
6 A/T |
7.2 l (7.6 US qt.) |
ATF SP-IV (Recommended MICHANG,SK, NOCA, Kia genuine) |
|
Dual clutch transmission |
Smartstream G1.0 T-GDi |
1.6~1.7 l (1.7~1.8 US qt.) |
API GL-4, SAE 70W- HK D DCTF TGO-10 PLUS (SK)- SPIRAX S6 GHDE 70W DCTF PLUS (H.K.SHELL) |
|
|
Smartstream G1.0 T-GDi 48V HEV |
||||
|
Coolant |
Smartstream G1.0 T-GDi |
6M/T |
5.9 l (6.2 US qt.) |
Mixture of antifreeze and water (Ethylene glycol base coolant for aluminum radiator) |
|
7DCT |
||||
|
Smartstream G1.0 T-GDi 48V HEV |
6iMT |
5.9 l (6.2 US qt.) |
||
|
7DCT |
||||
|
Smartstream G1.2 |
5M/T |
5.4 l (5.7 US qt.) |
||
|
(Petrol engine) 1.4 MPI |
6M/T |
4.9 l (5.2 US qt.) |
||
|
6A/T |
5.1 l (5.4 US qt.) |
|||
|
Brake / clutch fluid *5 |
0.7~0.8 l (0.7 ~ 0.8 US qt.) |
SAE J1704 DOT-4 LV, ISO4925 CLASS-6, FMVSS116 DOT-4 |
||
|
Intelligent Manual Transmission system actuator fluid |
Smartstream G1.0 T-GDi 48V HEV |
0.082 l(0.087 US qt.) |
SAE J1704 DOT-4 LV,ISO4925 CLASS-6,FMVSS116 DOT-4,FMVSS116 DOT-3 |
|
|
Fuel |
45 l (11.9 US gal.) |
- |
||
*1. : Refer to More Details
*2. : If the above recommended specification oil is not available, SAE 0W-20 grade synthetic oil can be used. (Except India, Middle East, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt, Central & South America)
*3. :Except India, Middle East, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt, Central & South America
*4. : For India, Middle East, Iran, Libia, Algeria, Sudan, Morocco, Tunisia, Egypt, Central & South America
*5. : To maintain your vehicle’s best brake and ABS/ESC performance, use Kia genuine brake fluid as in the specification.
Recommended SAE viscosity number
Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage.
When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.
|
Temperature Range for SAE Viscosity Numbers |
||
|---|---|---|
|
Temperature |
°C |
 |
|
°F |
 |
|
|
Petrol Engine Oil |
*1 |
 |
|
*2 |
 |
|
*1. : - Smartstream G1.0 T-GDi, Smartstream G1.0 T-GDi 48V HEV, Smartstream G1.2 : Except Middle east, Iran, Libia, Algeria, Sudan, Tunisia, Egypt - (Petrol engine) 1.4 MPI : Except India, Middle east, Iran, Libia, Algeria, Sudan, Tunisia, Egypt If the above recommended specification oil is not available, SAE 0W-20 grade synthetic oil can be used. If mineral oil or semi-synthetic oil is used, it is a severe maintenance condition in terms of engine oil change.
*2. : - Smartstream G1.0 T-GDi, Smartstream G1.0 T-GDi 48V HEV, Smartstream G1.2 : For Middle east, Iran, Libia, Algeria, Sudan, Tunisia, Egypt - (Petrol engine) 1.4 MPI : For India, Middle east, Iran, Libia, Algeria, Sudan, Tunisia, Egypt
If the above recommended specification oil is not available, SAE 5W-30 grade synthetic oil can be used. If mineral oil or semi-synthetic oil is used, it is a severe maintenance condition in terms of engine oil change.
