Search by Title only
Home > Driving your vehicle > Launch Control (For GT)

Launch Control (For GT)

Launch Control system controls the vehicle to avoid unnecessary wheel spin when driving on the slippery road. It optimizes a vehicle's acceleration from a stationary position.

Setting

  1. Select Setup→ Vehicle → Drive mode → Launch Control in the infotainment system screen.

  2. Prerequisite for activation

    • Driving mode: GT mode (or MY DRIVE mode: Sport+)

    • Steering wheel: Wheel alignment

    • Warning lights: None

    • Wheel speed: Normal

    • Motor temperature: Normal

  3. When Launch Control function operating conditions are satisfied, step on the brake pedal over a certain level and then depress the accelerator pedal lightly to operate.

    'Launch Control Ready' message will appear on the cluster once Launch Control is ready to activate.

  4. Once it is ready, pre-torque* will be automatically initiated.

    * pre-torque: Torque is responsible for making your vehicle accelerate quickly from a stationary position.

  5. Start driving after releasing the brake pedal within 8 seconds.

NOTICE

  • Launch Control will be canceled once you release the accelerator pedal.

  • If you want to use Launch Control again, you must cool down the vehicle for more than 2 minutes. (If the ready state exceeds 8 seconds, it is considered as used.)

  • The Launch Control function is limited when Speed Limit Assist is operating or the motor control unit is overheated.