Blind-Spot Safety

With the ignition switch or ENGINE START/STOP button in the ON position, select 'Driver Assistance → Blind-Spot Safety' from the 'User Settings (LCD display)' menu to set whether or not to use each function.
-
If ’Active Assist’ is selected, the function will warn the driver with a warning message, an audible warning and braking assist will be applied depending on the collision risk levels.
-
If ’Warning Only’ is selected, the function will warn the driver with a warning message, an audible warning depending on the collision risk levels. Braking will not be assisted.

When the engine is restarted with the function off, the ’Blind-Spot Safety System is Off’ message will appear on the cluster.
If you change the setting from ’Off’ to ’Active Assist’ or ’Warning Only’, the warning light on the side view mirror (outside mirror) will blink for approximately 3 seconds.
In addition, if the engine is turned on, when the function is set to ’Active Assist’ or ’Warning Only’, the warning light on the side view mirror (outside mirror) will blink for approximately 3 seconds.
-
If ’Warning Only’ is selected, braking is not assisted.
-
If ’Off’ is selected, the driver should always be aware of the surroundings and drive safely.
If the engine is restarted, Blind-Spot Collision-Avoidance Assist will maintain the last setting.