Headlamp low beam (RHD Vehicle)
Figure 1. Based on 10 m screen
OCV071056L
  • A: Vehicle axis

  • B: Vertical line of the left headlamp bulb center

  • C: Vertical line of the right headlamp bulb center

  • D: Horizontal line of headlamp bulb center

  • E: Ground

  • F: Cut-Off line

Operation

  • Turn the low beam on without driver aboard.

  • The cut-off line should be projected in the cut-off line shown in the picture.

  • When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.

  • Disengage the parking brake and put the gear in N (Neutral), in addition, if headlamp leveling device is equipped, adjust the headlamp leveling device switch to '0'.