Passenger's side
OMQ4023016

Press the following buttons at the same time for approximately 5 seconds for initialization.

  1. Pressing the front portion of the relaxation comfort seat switch (the direction of the original position of the relaxation comfort seat)

  2. Pressing the rear portion of the cushion height adjustment switch (the direction of lowering the cushion height)

  3. Pressing the upper portion of the seatback angle adjustment switch (the direction of laying the backrest)

The initialization process are as follows.

  1. The forward/backward position, seatback angle, height adjustment, and cushion tilt operate in sequence.

  2. After all operations, initialization is complete.

  3. Press the seat back angle adjustment switch to properly adjust the backrest before use.

The initialization process will be interrupted in the following situations:

  • When the passenger's side seat adjustment switch is pressed

CAUTION

Make sure there are no obstacles around the passenger seat before initialization.

NOTE
  • If the passenger side seat stops working during initialization, start initialization again.

  • After initialization, adjust the passenger seat to fit the passenger.