How to connect portable charging cable (ICCB: In-Cable Control Box) (Type B)

  1. Turn OFF all switches, move the shift dial to P (Park), and turn OFF the vehicle.

  2. Connect the plug to a household electric outlet.

    OMQ4PHQ013050L0
  3. Check if the power lamp (green) illuminates on the control box.

    OCVQ011024
  4. Depress the brake pedal and apply the parking brake.

  5. Open the charging inlet door by pressing rear center edge of the charging inlet door.

    OMQ4PHQ013013L1
  6. Remove any dust on the charging connector and charging inlet.

  7. Hold the charging connector handle.

    OMQ4PHQ013014L
    OCVQ011025

    Then, insert it into the charging inlet, until you hear a click sound. If it is not fully connected, improper connection between the charging connector and the charging terminals are a potential fire hazard.

  8. Charging starts automatically (charging lamp Iluminates).

    OCVQ0110250
  9. Check if the charging cable connection indicator of the high voltage battery in the instrument cluster is turned ON.

    OMV0532140

    Charging does not occur when the indicator is OFF. When the charging connector is not connected properly, reconnect the charging cable to charge.

    NOTE
    • The charging is in progress only with the shift dial is in P (Park). Charging the battery with the ENGINE START/STOP button in the ACC position is possible. However, it may discharge the 12-V battery. Thus, if possible, charge the battery with the ENGINE START/STOP button in the OFF position.

    • Moving the shift dial from P (Park) to R (Reverse)/N (Neutral)/D (Drive) stops the charging process. To restart the charging process, move the shift dial to P (Park), press the ENGINE START/STOP button to the OFF position, and disconnect the charging cable. Then, connect the charging cable and restart the charging process.

  10. After charging has started, the estimated charging time is displayed on the instrument cluster for about 1 minute. It is also displayed, when the driver's door is opened with charging in progress. When scheduled charging is set, the estimated charging time is displayed as "--".

    NOTE

    If the charging connector and charging inlet are not connected properly, the connector may droop or vibrate. In this case, hold the charging connector handle and push it all the way in.

    OMVQ013068N0