Remote Smart Parking Assist 2 (RSPA 2): (if equipped)

Remote Smart Parking Assist uses the front, front side, rear side, and rear ultrasonic sensors to detect parking spaces and control vehicle steering, speed, gear shifts, and help enter and exit parking spaces remotely from outside your vehicle.

Remote Smart Parking Assist 2 forward and backward button will be available if your vehicle is equipped with Surround View Monitor (SVM).: (if equipped)

Depending on your region, you can purchase Remote Smart Parking Assist 2 (RSPA 2) on Kia Connect Store.

Function

Description

Remote Operation

Remotely moving forward or backward

OMV073189L

Smart Parking or Remote Parking

Perpendicular reverse parking

OMV073190L

Parallel reverse parking

OMV073191L

Diagonal reverse parking

OMV073192L

Smart Exit

Parallel forward exit

OMV073193L

  • Remote Smart Parking and Remote Operation function may be operated from outside the vehicle using the smart key.

  • Smart Parking and Remote Parking function may be operated from inside the vehicle.

  • The Smart Parking and Remote Parking function assist of Remote Smart Parking Assist help the driver with perpendicular reverse parking, diagonal reverse parking and parallel reverse parking.

  • Smart Exit function helps the driver with parallel forward exit.

  • When Remote Smart Parking Assist operates, Parking Distance Warning and Surround View Monitor will also operate. For more details, refer to Forward/Reverse Parking Distance Warning (PDW) and Surround View Monitor (SVM) .

  • The parking function of the Remote Smart Parking Assist recognizes parking lines using the wide-angle camera to assist with parking.

WARNING

  • Always ensure that the wide-angle camera lens is kept clean. If the lens is covered with foreign material, it can negatively impact camera performance and may result in Remote Smart Parking Assist not operating properly.

  • If a collision occurs or the outside mirror is adjusted manually, Remote Smart Parking Assist may not operate properly.

  • Never disassemble or apply any impact on the ultrasonic sensor or its surroundings.

  • If the ultrasonic sensor is blocked by foreign material like snow or rain, it may affect the detection performance and cause improper operation. Check the sensor and clean it with a soft cloth if it is dirty.

  • Avoid directly spraying the ultrasonic sensors with high-pressure washers.

  • Do not spray the ultrasonic sensors directly with a high pressure washer.

  • Remote Smart Parking Assist may not operate properly when bumper height or ultrasonic sensor installation has been modified, if any accessories or stickers installed on the field of view of the ultrasonic sensor.

  • Never disassemble the detecting sensor or sensor assembly, or apply any impact on it.

  • If the detecting sensor have been replaced or repaired, we recommend that you have your vehicle inspected by an authorized Kia dealer/service partner.

  • Remote Smart Parking Assist may malfunction if the vehicle bumper height or ultrasonic sensor installation has been modified or damaged. Any non-factory installed equipment or accessories may also interfere with the sensor performance.

  • When the ultrasonic sensor is frozen or stained with snow, dirt, or water, the sensor may not operate until the stains are removed using a soft cloth.

  • Do not push, scratch or strike the ultrasonic sensor. Sensor damage could occur.

  • Do not spray the ultrasonic sensors or its surrounding area directly with a high pressure washer.