1. Getting ready to remotely move forward and backward

There are two ways to operate Remote Operation function.

Method (1): Using the function with vehicle off

OMV073026L_2

  1. door lock () button

  2. Remote Start button ()

  1. Within a certain range from the vehicle press the door lock () button on the smart key and lock all doors.

  2. Press and hold the Remote Start button () within 4 seconds until the vehicle starts.

For more details on remotely starting the vehicle, refer to Smart key .

Method (2): Using the function with vehicle on

OMV074277L_4

  1. 1. Leave the vehicle (keep the key) and close the doors.

  2. 2. Press and hold the parking button on the Smart Key.

  1. Park the vehicle in front of the space where you want to use Remote Operation function, and shift the gear to P (Park).

  2. Press and hold the Parking/View () button to turn on Smart Parking Assist. A message Under REMOTE control will appear on the infotainment system screen.

  3. Get out of the vehicle with the smart key and close all doors.

NOTE

  • Agree must be selected on the infotainment system screen and the infotainment system has to operate properly to use Remote Operation function.

  • Method (2) can be used after the vehicle has been driven above 5 km/h (3 mph).

  • If the function is turned on again after parallel parking is completed by Remote Smart Parking Assist, Remote Operation function can be used with Method (2).

  • Before initiating the Remote Operation function from outside the vehicle, make sure not to leave any smart keys or digital keys inside the vehicle.

  • The Remote Operation function will not work if there is a spare smart key or spare digital key inside the vehicle.