Recommended SAE viscosity number

Temperature range for SAE viscosity numbers

Smartstream G1.6 T-GDi/Smartstream G1.6 T-GDi (EURO 7)

A: Except the Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

B: For the Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

Gamma_3gen_T-GDi_General_Europe
Smartstream G2.0

A: Except the Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan, India

B: For the Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan, India

Nu_3gen_T-GDi
Smartstream D1.6/Smartstream D1.6 MHEV

A: All

NewR_NewU_all_KA4

An engine oil displaying this American Petroleum Institute (API) Certification Mark conforms to the International Lubricant Specification Advisory Committee (ILSAC). It is recommended to only use engine oils that uphold this API Certification Mark.

CAUTION

Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Consider the range of temperature your vehicle will be operated in before the next oil change.

NOTE

Never add any additives to the engine oil. Engine oil additives can change the properties of engine oil and may cause serious engine failure.

When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.