Starting the diesel engine
Operation
-
Make sure the parking brake is applied.
-
For Manual Transmission, depress the clutch pedal fully and shift to N (Neutral). Keep the clutch pedal and brake pedal depressed until the engine is started.
For Automatic Transmission/Dual Clutch Transmission, depress the brake pedal fully and make sure the gear is in P (Park). The engine can also be started when the gear is in N (Neutral).
-
Fully depress the brake pedal.
-
Turn the key to ON position or press the ENGINE START/STOP button. The glow indicator (
) will appear. -
If the glow indicator (
) is turned off, turn the key to START position or fully depress the brake (Automatic Transmission/Dual Clutch Transmission) or brake and clutch (Manual Transmission) pedal until the engine is started.
-
If the engine does not start within 10 seconds after the preheating is completed, turn the ignition key once more to the LOCK position for 10 seconds, and then to the ON position, in order to preheat again.
-
If the ENGINE START/STOP button is pressed once more while the engine is pre-heating, the engine may start.