Using the Tire Mobility Kit
Operation
Detach the speed restriction label from the compressor, and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast.
![]() ONQ5E065023 |
-
Shake the sealant bottle.
OCV061010L -
Remove the sealant bottle cap and sealant bottle holder cap and screw the bottle onto the sealant bottle holder.
OCV061011L -
Make sure the compressor valve on the filling hose is locked.
ONQ5H064013 -
Unscrew the valve cap and screw the filling hose onto the tire valve.
ONQ5H064014 -
Make sure the compressor is turned off.
-
Connect the power outlet connector into the vehicle's power outlet.
ONQ5H064015
ONQ5E065024 -
Start the vehicle.
-
Turn the compressor on and let it run for approximately 5-7 minutes to fill the sealant up to the proper pressure.
-
Turn the compressor off.
-
Detach the filling hose from the tire valve.
