Energy flow
The hybrid system informs the drivers its energy flow in various operating modes. While driving, the current energy flow is specified in 11 modes.
Vehicle stop
![]() OMQ4PHQ013024L |
The vehicle is stopped.
(No energy flow)
EV propulsion
![]() OMQ4PHQ013025L |
Only the motor power is used to drive the vehicle.
()
Power assist
![]() OMQ4PHQ013026L |
Both the motor and the engine power are used to drive the vehicle.
()
Engine only propulsion
![]() OMQ4PHQ013027L |
Only the engine power is used to drive the vehicle.
()
Engine generation
![]() OMQ4PHQ013028L |
When the vehicle is stopped, the high-voltage battery is charged up by the engine.
()
Regeneration
![]() OMQ4PHQ013034L |
The high-voltage battery is charged up by the regenerative brake system.
()
Engine brake
![]() OMQ4PHQ013029L |
The engine braking is used to decelerate the vehicle.
()
Power reserve
![]() OMQ4PHQ013030L |
The engine is simultaneously used to drive the vehicle and to charge up the high-voltage battery.
()
Engine generation/motor drive
![]() OMQ4PHQ013031L |
The engine charges up the high-voltage battery. The motor power is used to drive the vehicle.
()
Engine generation/regeneration
![]() OMQ4PHQ013032L |
The engine and regenerative brake system charges up the high-voltage battery.
()
Engine brake/regeneration
![]() OMQ4PHQ013032L |
The engine braking is simultaneously used to decelerate the vehicle and to charge up the high-voltage battery.
()
Start engine to avoid battery discharge
![]() OMQ4PHQ013043L |
If the engine is not turned on with the vehicle in ACC or ON for a while, the battery can be discharged. Please turn on the engine to prevent 12V battery from discharge.
Aux. Battery Saver+ (Plug-in hybrid vehicle): (if equipped)
The Aux. Battery Saver+ is a function that monitors the charging status of the 12V auxiliary battery. If the auxiliary battery level is low, the main high voltage battery charges the auxiliary battery.
The Aux. Battery Saver+ function will be ON when the vehicle is delivered. If the function is not needed, you may turn it off in the infotainment system. For more information, refer to Infotainment system.
-
Cycle Mode: When the vehicle is OFF with all doors, hood and tailgate closed, the Aux. Battery Saver+ periodically activates according to the auxiliary battery status.
-
Automatic Mode: When the vehicle is in the ON position with the charging connector plugged in, the function activates according to the auxiliary battery status to prevent over-discharge of the auxiliary battery.
-
The Aux. Battery Saver+ activates for a maximum of 20 minutes. If the Aux. Battery Saver+ function activates more than 10 times consecutively, in the Automatic Mode the function will stop activating, judging that there is a problem with the auxiliary battery. In this case, drive the vehicle for some period of time. The function will start activating if the auxiliary battery returns to normal.
-
The Aux. Battery Saver+ function cannot prevent battery discharge if the auxiliary battery is damaged, worn out, used as a power supply or unauthorized electronic devices are used.
The driver can activate the Aux. Battery Saver+ function by turning the vehicle to the ON position and by selecting:
When the function is activating the charging indicator lamp will be on in red and high voltage electricity will be flowing in the vehicle. Do not touch the high voltage electric wire (orange), connector, and all electric components and devices. This may cause electric shock and lead to injuries. Also, do not modify your vehicle in any way. This may affect your vehicle performance and lead to an accident.
![]() ONQ5EPQ011019L |











