Turning ON Highway Lane Change Assist
![]() OCL4M055110N |
|
Highway Lane Change Assist is ready to operate when the function is ON and the following conditions are satisfied:
-
Highway Driving Assist is operating.
-
Lane Following Assist is operating.
-
Your vehicle is ON and detects another vehicle behind more it than once.
-
Your speed is above 30 km/h (20 mph).
-
At low speeds, the system operates only when vehicles in the adjacent lanes are detected and there is no collision risk during a lane change.
-
Australia: 30 km/h (20 mph) to 60 km/h (40 mph)
-
Europe: 30 km/h (20 mph) to 80 km/h (50 mph)
-
-
The instrument cluster does not display the hands-off warning.
-
Hazard lights are OFF.
-
While the Lane Change Assist function is ON, Lane Following Assist will not cancel, even if the turn signal indicator or hazard lights are operating.
-
Lane Change Assist automatically turns OFF when you drive in the following conditions:
-
There is 1 driving lane.
-
Roads lack physical center separations structures, such as guardrails.
-
A pedestrian or cyclist is on the road ahead.
-
A road section with an intersection or crosswalk ahead. (Europe)
-
-
If you drive below 25 km/h (15 mph) when Lane Change Assist is ready to operate, the function’s status changes to standby.
-
At low speeds, the system switches to standby if no vehicles are detected in the rear side areas of the left and right adjacent lanes. The system also switches to standby if a collision risk is detected.
-
Australia: 30 km/h (20 mph) to 60 km/h (40 mph)
-
Europe: 30 km/h (20 mph) to 80 km/h (50 mph)
-
-
The Lane Change Assist status changes to standby if a risk of collision is detected.
-
The images or colors may display differently depending on the specifications of the instrument cluster or theme.
-
The lanes and surrounding objects displayed on the cluster may differ from the actual conditions.
When Highway Lane Change Assist turns OFF, Steering Assist is temporarily canceled. Always be cautious when driving.
