Aiming point
![]() OSG2H126060L |
![]() OSG2H126061L |
![]() OSG2H126057L |
![]() OSG2H126058L |
-
Screen
|
Vehicle condition |
Head lamp (LED type) |
||||||
|---|---|---|---|---|---|---|---|
|
Ground Height |
Distance between lamps |
||||||
|
H1 (LOW) |
H2 (HIGH) |
H3 |
W1 (LOW) |
W2 (HIGH) |
W3 (HIGH) |
||
|
Head lamp – Type A |
Without driver [mm (in)] |
770 (30.3) |
770 (30.3) |
- |
1,426 (57.6) |
1,426 (57.6) |
- |
|
With driver [mm (in)] |
772 (30.4) |
772 (30.4) |
- |
||||
|
Head lamp – Type B |
Without driver [mm (in)] |
764 (30.1) |
695 (27.3) |
384.0 (15.1) |
1,421 (56.0) |
1,423.2 (56.0) |
1,411 (43.9) |
|
With driver [mm (in)] |
766 (30.2) |
697 (27.4) |
384.2 (15.1) |
||||
Head lamp low beam (LHD Vehicle)

-
Vehicle axis
-
Vehicle line of the left head lamp bulb center
-
Vehicle line of the right head lamp bulb center
-
Horizontal line of the head lamp bulb center
-
Cut-off line
-
Ground
-
Turn the low beam on without driver aboard.
-
The cut-off line should be projected in the cut-off line shown in the picture.
-
When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.
-
Disengage the parking brake and put the gear in N (Neutral), in addition, if headlamp leveling device is equipped, adjust the headlamp leveling device switch to '0'.
Head lamp low beam (RHD Vehicle)

-
Vehicle axis
-
Vehicle line of the left head lamp bulb center
-
Vehicle line of the right head lamp bulb center
-
Horizontal line of the head lamp bulb center
-
Cut-off line
-
Ground
-
Turn the low beam on without driver aboard.
-
The cut-off line should be projected in the cut-off line shown in the picture.
-
When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.
-
Disengage the parking brake and put the gear in N (Neutral), in addition, if headlamp leveling device is equipped, adjust the headlamp leveling device switch to '0'.



