Replacing the glove box lamp

To replace the glove box lamp (Bulb type), follow these steps:
OSG2H126047L_2

  1. Make sure the vehicle is in the OFF position and disconnect the negative 12V battery terminal.
  2. Use a slotted (flat-tip) screwdriver to gently pry the lamp assembly from the vehicle interior.
  3. Remove the cover from the lamp assembly.
  4. Pull the bulb straight out of the socket to remove it.
  5. Install a new bulb in the socket.
  6. Replace the cover on the lamp assembly.
  7. Replace the lamp assembly on the vehicle interior.
CAUTION

To avoid finger burns or electric shock, make sure the interior lights are off before you replace one.

NOTE

Be careful not to dirty or damage the lens, lens tab, and plastic housings.