How to disconnect DC charger
-
Remove the charging connector using the DC charger when DC charging is complete or after you stop charging. Refer to each DC charger manual for details about how to disconnect the charging connector.
-
Make sure to completely close the charging door.
-
If you use a DC charger when the vehicle is already fully charged, some DC chargers will send out an error message. When the vehicle is fully charged, do not charge the vehicle.
-
If you cannot open the charging door due to freezing weather, tap lightly or remove any ice near the charging door. Do not try to forcibly open the charging door.
-
To control the temperature of the high-voltage battery whilst charging, the air conditioner is used to cool down the battery, which may generate noise from the operation of the air conditioner compressor and cooling fan.
Also, the air conditioner's performance may be degraded during summer due to the operation of the cooling system for the high voltage battery.
-
Even though charging is possible with the EV button in the ON/START position, for your safety, start charging when the EV button is in the OFF position, and the vehicle in P (Park). After charging has started, you can use electrical components such as the radio by pressing the EV button to the ACC or ON position.
During charging, the gear cannot be shifted from P (Park) to any other gear.
-
Depending on the condition and durability of the high voltage battery, charger specifications, and ambient temperature, the time required for charging the battery may vary.
-
If the charging connector and charging inlet are not connected properly, the connector may droop or vibrate. In this case, hold the charging connector handle and push it all the way in.