Operation

1. Shake the sealant bottle.

2. Remove the cap of the sealant bottle and screw connection hose onto the connector of the sealant bottle.

3. Make sure the compressor valve on the filling hose is locked, unscrew the valve cap and screw the filling hose onto the tyre valve.

4. Make sure the compressor is turned off.

5. Connect the power outlet connector, start the vehicle.

6. Turn the compressor on and let it run for approximately 5–7 minutes to fill the sealant up to the proper pressure.

7. Inject the sealant to ensure recommended tyre air pressure. Check and adjust the tyre pressures later. For the recommended air pressure, Refer to Tyres and wheels.

8. Turn the compressor off, detach the filling hose from the tyre valve.

9. After using it, leave the TMK (Tyre Mobility Kit) in place in the vehicle with the injection hose in the sealant bottle side and the injection hose in the compressor side assembled.