Temperature control
The temperature will increase to the maximum (82 °F (28 °C)) by turning the knob to the extreme right.
The temperature will decrease to the minimum (62 °F (17 °C)) by turning the knob to the extreme left.
When turning the knob, the temperature will increase or decrease by 1 °F / 0.5 °C. When set to the lowest temperature setting, the air conditioning will operate continuously.
When starting the vehicle in cold weather using manual temperature control, operate the system in the following method to improve heating.
-
Turn off or lower the blower, right after starting the engine.
-
Allow the engine to warm up during this time since the air flow from the heater is still cold.
-
After a few minutes of engine warm up, turn on or set the fan to a higher level and adjust the temperature setting to hot.
Adjusting the driver and passenger side temperature equally
-
Press the "SYNC" button to adjust the driver and passenger side temperature equally. The passenger side temperature will be set to the same temperature as the driver side temperature.
-
Turn the driver side temperature control knob. The driver and passenger side temperature will be adjusted equally.
Adjusting the driver and passenger side temperature individually
-
Press the "SYNC" button again to adjust the driver and passenger side temperature individually. The illumination of button turns off.
-
Operate the driver side temperature control knob to adjust the driver side temperature.
-
Operate the passenger side temperature control knob to adjust the passenger side temperature.
Temperature conversion
You can switch the temperature mode from Centigrade to Fahrenheit as follows:
While pressing the OFF button, press the AUTO button for 3 seconds or more. The display will change from Centigrade to Fahrenheit, or from Fahrenheit to Centigrade. If the battery has been discharged or disconnected, the temperature mode display will reset to Fahrenheit.