2. Operating HomeLink®

1) Operating HomeLink®

  1. Press and release the desired programmed HomeLink button (1, 2 or 3).

    OCV041604N0
NOTE

The HomeLink indicator (7) should light green, solid or flashing, and your programmed device should operate.

If your device does not operate, the HomeLink programming was not successful, and you'll need to reprogram the button.

2) Two-Way Communication Display Behavior

  1. Press and release one of the programmed HomeLink buttons (1, 2 or 3)

    OCV041607N

  2. The indicator (4) and (6) operates as below, if your garage door opener has Two-Way Communication functionality.

    OCV041608N

    • If the indicator (4) flashes in Orange, it indicates that the garage door is "Closing".

    • The indicator (4) turns solid green once the garage door has closed.

    • If the indicator (6) flashes in Orange, it indicates that the garage door is "Opening".

    • The indicator (6) turns solid green once the garage door has fully opened.

    • If the indicator (4) or (6) does not turn to green, it indicates that the last status of garage door was not received properly. The HomeLink mirror tries to receive the last known status of the garage door for a few seconds.

3) Recalling Garage Door Status

HomeLink mirror with Two-Way Communication provides a way to view the last stored message from the garage door opener. In order to recall the last known status of the last activated device, press the buttons "1 and 2" OR "2 and 3" simultaneously.

  • If the indicator (4) appears solid Green, it indicates that the last activated device was "closed" properly.

  • If the indicator (6) appears solid Green, it indicates that the last activated device was "open" properly.