3. Erasing HomeLink® Buttons

1) Erasing and Reprogramming a Single HomeLink® Button:

  1. Press and hold the desired HomeLink button you want to re-program. DO NOT release the button.

  2. The HomeLink indicator light (7) will appear solid green. Release the button as soon as the HomeLink indicator light (7) begins to flash orange, usually about 20 seconds.

  3. Proceed with the steps in the "Programming a New HomeLink Button" section.

NOTE

If you do not complete the re-programming of a new device to the button, it will revert to the previously stored programming.

2) The following instructions will erase ALL HomeLink® programming from ALL buttons:

OCV041609N_2

  1. Press and hold the buttons (1) and (3) simultaneously

  2. The HomeLink indicator light (7) will appear solid Orange for about 10 seconds

  3. Release the buttons once the HomeLink indicator light (7) changes to Green and flashes rapidly

  4. Now all three HomeLink buttons (1), (2) and (3) are cleared of any programming