How to connect portable charger (ICCB: In-Cable Control Box)

Simple operation

  1. Connect the plug to a household electric outlet.

  2. Open the charging door.

  3. Connect the charger to the vehicle charging inlet.

For more details, refer to the full manual on the vehicle system.

Operation

  1. Connect the plug to a household electric outlet.

  2. Check if the power lamp (green) appears on the control box.

  3. Depress the brake pedal and apply the parking brake.

  4. Turn OFF all switches, shift to P (Park), and turn OFF the vehicle. If charging is initiated without the gear in P (Park), the charging will start after the gear is automatically shifted to P (Park).

  5. Open the charging door.

    For more details, refer to Charging door .

  6. Open the protection caps of the charging connector and the charging plug. Check if there are any foreign substances or dust.

  7. Hold the charging connector handle and connect it to the vehicle charging inlet. Push the connector all the way in. If the charging connector and charging terminal are not connected properly, this may cause a fire.

  8. Charging starts automatically (charging lamp appears).

  9. Check if the charging indicator light ( ) of the high voltage battery in the instrument cluster is turned ON. Charging is not active when the charging indicator light ( ) is OFF. When the charging connector is not connected properly, reconnect the charging cable to charge it again.

    OMV053096L

  10. After charging has started, the estimated charging time is displayed on the instrument cluster for about 1 minute.

OSVQ014031L

  1. Remaining Time

If you open the driver seat door whilst charging, the estimated charging time is also displayed on the instrument cluster for about 1 minute. When scheduled charging or scheduled air conditioner/heater is set, the estimated charging time is displayed as "--".

CAUTION

Please make sure that charge level selection matches the capacity of your circuit breaker to avoid blown fuse.

NOTE

  • If you cannot open the charging door due to freezing weather, tap lightly or remove any ice near the charging door. Do not try to forcibly open the charging door.

  • For safety, only charge the vehicle whilst it is in the P (Park) position. After charging has started, press the start button to enter the POWER ON state if you wish to use the radio or other features.

    During charging, the gear cannot be shifted from P (Park) to any other gear.

  • Depending on the condition and durability of the high voltage battery, charger specifications, and ambient temperature, the time required for charging the battery may vary.

  • If the charging connector and charging inlet are not connected properly, the connector may droop or vibrate. In this case, hold the charging connector handle and push it all the way in.

  • During charging, the quality of radio reception may degrade in some areas.