Resetting the System

Take the following procedures to reset integrated memory system, when it does not operate properly.

Resetting integrated memory system

  • Stop the vehicle and open the driver’s door with the EV button in the POWER ON or DRIVE READY position and the vehicle shifted to P (Park).

  • Adjust the driver’s seat and seatback to the foremost position.

  • Press the memory button 1 (or 2) and push forward the driver’s seat movement switch over 2 seconds simultaneously.

Whilst resetting integrated memory system

  • Resetting starts with a notification sound.

  • The driver’s seat and seatback is adjusted to the rearward position with the notification sound.

  • The driver’s seat and seatback is re-adjusted to the default position (central position) with the notification sound.

However, in the following cases, the resetting procedure and the notification sound may stop.

  • The memory button is pressed.

  • The seat control switch is operated.

  • The gear is shifted out of P (Park).

  • The driving speed exceeds 5 km/h (3 mph).

  • The driver’s door is closed.

NOTE

  • Whilst integrated memory system is being reset, if the resetting and notification sound stops incompletely, restart the resetting procedure again.

  • Make sure that there are no objects around the driver’s seat in advance of resetting the integrated memory system.

  • After resetting the integrated memory system, the adjustment for the driver seat must be stored again to recall the memory position.

    OSV034006R