Operating the climate control system
|
Mode |
Operation |
Air flow |
|---|---|---|
|
|
Air flow is directed toward the upper body and face. |
2, 4 |
|
|
Air flow is directed towards the face and the floor. |
2, 3, 4, 5 |
|
|
Air flow is directed towards the face, floor and the windscreen with small amount directed to the side-window defrosters |
1, 2, 3, 4, 5 |
|
|
Most of the air flow is directed to the floor, with a small amount of air directed to the windscreen, side-window defrosters, and side air vents. |
1, 3, 4, 5 |
|
|
Most of the air flow is directed to the floor and the windscreen, with a small amount directed to the side-window defrosters and side air vents. |
1, 3, 4, 5 |
|
|
Most of the air flow is directed to the windscreen, with a small amount of air directed to the side-window defrosters and side air vents. |
1, 4 |
*
*: if equipped
Simple operation
-
Set the mode selection button/lever as desired.
-
Set the temperature, air intake control, and fan speed.
If the windscreen fogs up, select the Front Defrost (
) mode.
Operation
-
Start the vehicle.
-
Set the mode selection button/lever as desired. To improve the effectiveness of heating and cooling:
-
Heating: (
)
-
Cooling: (
)
-
-
Set the temperature control to the desired temperature level.
-
Set the air intake control to the position for outside (fresh) air if required.
-
Set the position of the fan speed control so that it runs at the desired speed.
-
If desired, turn the air conditioning ON with the temperature set high in order to dehumidify the air before it enters into the cabin.
If the windscreen fogs up, select the Front Defrost (
) mode.
