Stopping vehicle and ending brake control
When the vehicle is stopped due to emergency braking, the warning message will appear on the cluster.
-
Warning message: Drive carefully
For your safety, the driver should depress the brake pedal immediately and check the surroundings.
-
Brake control will end after the vehicle is stopped by emergency braking for approximately 2 seconds.
NOTE
The warning sound during collision warning and emergency braking can be switched off by pressing the hazard warning light.
TIP
When turning right (left-hand drive) or left (right-hand drive) at an intersection, braking is assisted to reduce or avoid collisions if there is a collision risk with a cyclist approaching at the speed of 15 to 20 km/h (9 to 12 mph) from the opposite side.