3D view function

OSV054013R

(1) Parking/View button

Press the Parking/View button (1) to turn on Rear View Monitor.

Press the button again to turn off the function.

OSV054316R

(2) View switching button

(3) Back button
OSV054167R

(4) Infotainment system power button

The 3D view function of the Surround View Monitor shows the surroundings of the vehicle from various angles. You can adjust the angle by touching and dragging the screen. Pressing the 3D view button again restores the initial angle setting.

The 3D view of the Surround View Monitor is activated under the following conditions:

  • P (Parking) or N (Neutral) or D (Drive) position with a vehicle speed slower than 10 km/h (6 mph), or when selecting the 3D view button (2) whilst the Surround View Monitor is activated in R (Reverse) mode.

The 3D view function of the Surround View Monitor whilst parking will be turned off under the following conditions:

  • Shifting from N (Neutral) or D (Drive) to P (Parking)

  • Pressing the Parking/View button (1)

  • Pressing the back button (3) on the Surround View Monitor screen

  • Pressing the infotainment system power button (4)

  • Driving faster than 10 km/h (6 mph)

When the vehicle is in R (Reverse), the 3D view function of the Surround View Monitor will be turned off under the following conditions:

  • Shifting to P (Parking)

NOTE

  • The 3D view does not display parking guidelines.

  • The top view screen, which is displayed with a Front/Rear view or 3D view, converts the original images entered from the four wide-angle cameras to provide a 360-degree image around the vehicle that is viewed down.

  • Top view is not displayed with front/ rear wide view.