Head lamp low beam (RHD Vehicle)
Figure 1. Based on 10 m screen
OSV074066L

  1. Vertical line of the left head lamp bulb centre

  2. Cut-Off line

  3. Vehicle axis

  4. Vertical line of the right head lamp bulb centre

  5. Horizontal line of head lamp bulb centre

  6. Ground

Operation

  • Turn the low beam on without driver aboard.

  • The cut-off line should be projected in the cut-off line shown in the picture.

  • When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.

  • Disengage the parking brake and put the gear in N (Neutral), in addition, if headlamp levelling device is equipped, adjust the headlamp levelling device switch to '0'.