Closing the bonnet
-
Before closing the bonnet, check the following:
-
All filler caps in the under bonnet area must be correctly installed.
-
Jack must be secured in its retainer to prevent it from rattling.
-
-
Secure the support rod in its clip.
-
Lower the bonnet to about 30 cm (12 inches) height and then let it drop to properly lock in place.
Make sure the bonnet is properly locked before driving.
-
Check that the bonnet has engaged properly. If the bonnet can be raised slightly, it is not properly engaged. Open it again and close it with a little more force.
-
Before closing the bonnet, ensure that all obstructions are removed from the bonnet opening. Closing the bonnet with an obstruction present in the bonnet opening may result in property damage or severe personal injury.
-
Do not leave gloves, rags or any other combustible material in the engine compartment. Doing so may cause a heatinduced fire.
-
Always double check to be sure that the bonnet is firmly latched before driving away. Driving with the bonnet opened may cause a total loss of visibility, which might result in an accident.
-
Do not press excessively or step on the bonnet. This can cause the bonnet to fall and result in serious injury.