Main fuse (multi-fuse)

Figure 1. Smartstream G1.6 T-GDi
P_CD27_D12_033_1_E
Figure 2. Smartstream G1.0 T-GDi/Smartstream G1.0 T-GDi MHEV
P_CD27_D12_034_1_E

If the main fuse (multi-fuse) is blown, follow these steps to remove it:

  1. Make sure the vehicle is in the OFF position.
  2. Disconnect the negative 12V battery cable.
  3. Remove the nuts as shown.
  4. Replace the fuse with a new one of the same rating.
  5. Reinstall in the reverse order of removal.
NOTE

Visually inspect the 12V battery cap to make sure it is closed securely. If the 12V battery cap is not securely latched, influx of moisture into the electrical system may damage the system.