Aiming point

P_CD27_D12_061_E
P_CD27_D12_062_E
  1. Screen

Vehicle condition

Head lamp (LED type)

Front Fog lamp (LED type)

Ground Height

Distance between lamps

Ground Height

Distance between lamps

Low/High beam

Low/High beam

H3

W3

H1

H2

W1

W2

without driver

[mm (in)]

736.5 (29.0)

613.0 (24.1)

1,448 (57.0)

1,448.0 (57.0)

386.0 (15.2)

555.0 (21.9)

with driver

[mm (in)]

726.5 (28.6)

603.0 (23.7)

1,448 (57.0)

1,448.0 (57.0)

386.0 (15.2)

555.0 (21.9)

Head lamp low beam (LHD Vehicle)

Figure 1. Based on 10 m screen
KIA_D12_003
  1. Vehicle axis

  2. Vehicle line of the left head lamp bulb center

  3. Vehicle line of the right head lamp bulb center

  4. Horizontal line of the head lamp bulb center

  5. Cut-off line

  6. Ground

Operation
  1. Turn the low beam on without driver aboard.

  2. The cut-off line should be projected in the cut-off line shown in the picture.

  3. When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.

  4. Disengage the parking brake and put the gear in N (Neutral), in addition, if headlamp leveling device is equipped, adjust the headlamp leveling device switch to '0'.

Head lamp low beam (RHD Vehicle)

Figure 2. Based on 10 m screen
KIA_D12_002
  1. Vehicle axis

  2. Vehicle line of the left head lamp bulb center

  3. Vehicle line of the right head lamp bulb center

  4. Horizontal line of the head lamp bulb center

  5. Cut-off line

  6. Ground

Operation
  1. Turn the low beam on without driver aboard.

  2. The cut-off line should be projected in the cut-off line shown in the picture.

  3. When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.

  4. Disengage the parking brake and put the gear in N (Neutral), in addition, if headlamp leveling device is equipped, adjust the headlamp leveling device switch to '0'.

Front fog lamp: (if equipped)

Figure 3. Based on 5 m screen
KIA_D12_001
  1. Vehicle axis

  2. Vehicle line of the left fog lamp bulb center

  3. Vehicle line of the right fog lamp bulb center

  4. Horizontal line of the fog lamp bulb center

  5. Cut-off line

  6. Ground

Operation
  1. Turn the front fog lamp on without driver aboard.

  2. The cut-off line should be projected in the cut-off line shown in the picture.

  3. Disengage the parking brake and put the gear in N (Neutral).

NOTE

Place the vehicle at a distance of 5 m (16.4 ft.) from the screen when aiming the front fog lamps.