Search by Title only
Home > Features of your vehicle > LCD display > LCD display modes

LCD display modes

View

Description

Driving Assist view

Displays information related to Driver assistance system

Navigation view

Displays information related to navigation system

Utility information view

Displays information related to driving, warning, etc.

Fuel economy

This information is always displayed at the bottom center of the Full LCD cluster.

  1. Average energy economy

  2. Instant energy economy

Average Fuel Economy (1)

  • The average fuel economy is calculated by the total driving distance and fuel consumption since the last average fuel economy resets.

    • Fuel economy range: 0-99.9 MPG or km/L, L/100 km

NOTICE

The average fuel economy is not displayed for more accurate calculation if the vehicle does not drive more than 10 seconds or 0.03 mi (50 m) since the ENGINE START/STOP button is turned to ON.

Instant Fuel Economy (2)

  • This mode displays the instant fuel economy during the last few seconds when the vehicle speed is more than 6.2 mph (10 km/h).

    • Fuel economy range:

      0.0-30 km/L, L/100 km or 0.0-50.0 MPG

Driving Assist mode

This mode displays the state of:

  • Lane Keeping Assist

  • Smart Cruise Control (if equipped)

  • Navigation-based Smart Cruise Control (if equipped)

  • Lane Following Assist

  • Highway Driving Assist (if equipped)

* For more details, refer to each system information in More Details.

Navigation view

This mode displays the state of the navigation.

Utility information view

Low tire pressure warning display

A: Low tire pressure

This warning message is displayed if the tire pressure is low. The corresponding tire on the vehicle will appear.

* For more details, refer to More Details.

Drive Info display

This display shows the trip distance, the average fuel efficiency, and the instant fuel efficiency (or the total driving time) once per one ignition cycle.

A: Current Trip

  1. Trip

  2. Timer

  3. Avg.

  • Fuel efficiency is calculated after the vehicle has run for more than 0.2 miles (300 m).

  • The information will automatically reset when the driver's door is opened after the ignition is turned off, or approximately 3 minutes have passed after the ignition is turned off.

  • If the engine is running, even when the vehicle is not in motion, the information will be accumulated.

NOTICE

The vehicle must be driven for a minimum of 0.2 miles (300 m) since the last ignition cycle before the average accumulated driving information is recalculated.

Information since refueling

This display shows the trip distance, the average fuel efficiency, and the instant fuel efficiency (or the total driving time) since refueling.

A: Sine Refueling

  1. Trip

  2. Timer

  3. Avg.

  • Information since refueling is calculated after the vehicle has run for more than 0.19 miles (300 m).

  • If you press "OK" button for more than 1 second after the information since refueling is displayed, the information will be reset.

  • If the engine is running, even when the vehicle is not in motion, the information will be accumulated.

Accumulated driving information mode

This display shows the accumulated trip distance, the average fuel efficiency, and the instant fuel efficiency (or the total driving time).

A: Since Last Reset

  1. Trip

  2. Timer

  3. Avg.

  • Accumulated information is calculated after the vehicle has run for more than 0.19 miles (300 m).

  • If you press "OK" button for more than 1 second after the Cumulative Information is displayed, the information will be reset.

  • If the engine is running, even when the vehicle is not in motion, the information will be accumulated.

Other view modes

Master warning mode

This warning light informs you of the following situations.

  • Driver assistance system malfunction, limitation or radar/camera blockage (if equipped)

  • LED headlamp malfunction

  • Lamp malfunction

  • TPMS (Tire Pressure Monitoring System) failure, low tire pressure, etc.

At this time, a Master Warning icon will appear. If the warning situation resolves, the master warning light will be turned off and the Master Warning icon will disappear.

Service mode

This mode reminds you of scheduled maintenance information.

A: Service Interval

Service Interval

It calculates and displays when you need a scheduled maintenance service (mileage or days).

If the remaining mileage or time reaches 900 miles (1,500 km) or 30 days, "Service interval" message is displayed for several seconds each time you set the ignition switch or ENGINE START/STOP Button to the ON position.

Service required

If you do not have your vehicle serviced at the pre-programmed service interval, a "Service required" message is displayed for several seconds each time you turn on the engine.

To reset the service interval to the mileage and days you inputted before:

  • Press the OK button (Reset) for more than 1 second.

NOTICE

If any of the following conditions occurs, the mileage and days may be incorrect.

  • The battery cable is disconnected.

  • The battery is discharged.