Automatic release of EPB

The EPB is released automatically under following conditions.

Shift lever type: (if equipped)

  • Gear in P (Park)

    With the engine running engage the brake pedal and shift out of P (Park) to R (Reverse) or D (Drive).

  • Gear in N (Neutral)

    With the engine running engage the brake pedal and shift out of N (Neutral) to R (Reverse) or D (Drive).

  1. Start the engine.

  2. Fasten the driver's seat belt.

  3. Close the driver's door, bonnet and tailgate.

  4. Press the accelerator pedal whilst the gear is in R (Reverse), D (Drive) or Sports mode.

Shift dial SBW type: (if equipped)

  1. Start the engine.

  2. Fasten the driver's seat belt.

  3. Close the driver's door, bonnet and tailgate.

  4. Press the accelerator pedal whilst the gear is in R (Reverse), D (Drive) or Sports mode.

Make sure the brake warning light goes off.

NOTE

  • For your safety, you can engage the EPB even though the ENGINE START/STOP button is in the OFF position, but you cannot release it.

  • For your safety, press the brake pedal and release the parking brake manually with the EPB switch when you drive downhill or when backing up the vehicle.

Do not follow the above procedure when driving on a flat level ground. The vehicle may suddenly move forward.

NOTE

If the parking brake warning light is still on even though the EPB has been released, have the system checked by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

CAUTION

Do not drive your vehicle with the EPB applied. It may cause excessive brake pad and brake rotor wear.