How to change the mode

The mode can be switched when the switch is in the ON position.

OMQ4PH033060_2

  1. Pull the mode select lever to all the way switch to the Digital Center Mirror mode (camera view mode).

    Displays an image of the area behind the vehicle. In this mode, the camera indicator is shown.

  2. Push the mode select lever to all the way switch to the optical inside rearview mirror mode.

    Turns off the display of the Digital Center Mirror allows it to be used as an optical mirror.

Adjusting the mirror height

OMV033428

The height of the rearview mirror can be adjusted to suit your driving posture.

Change to optical mirror mode, adjusting the rearview mirror angle by moving it up and down.

Display settings (Digital mirror mode)

OMV033439

  1. Press the menu button (1) The icons will be displayed.

    Icons

    Settings

    Select to adjust the brightness of the display.

    Select to adjust the display up/down.

  2. Press the menu button (1) repeatedly and select the item you want to adjust.

  3. Press the button (2) or button (3) to change the setting.

    The icons will disappear if the button is not operated for approximately 5 seconds or more.

If the brightness of the DCM is set too high, it may cause eye strain.

Adjust the DCM to an appropriate brightness. If your eyes become tired, change to optical mirror mode.

To prevent the light sensors from malfunctioning
OMV033429
OMV033448

To prevent the light sensors from malfunctioning, do not touch or cover them.

Digital mirror mode operating condition

The DCM operates when the ENGINE START/STOP button is in the ON position. When the ENGINE START/STOP button is changed OFF or ACC position, the image will disappear.

When using the DCM in digital mirror mode

  • When the liftgate is open, the DCM image may not display properly. Before driving, make sure the liftgate is closed.

  • If the display is difficult to see due to reflected light, close the sunshade of the sunroof.

  • Any of the following conditions may occur when driving in the dark. None of them indicates that the malfunction has occurred.

    • Color of objects in the displayed image may differ from their actual color.

    • Depending on your physical condition or age, it may take longer than usual to focus on the displayed image. If you have trouble focusing, change to optical mirror mode.

    • Do not let passengers stare at the displayed image when the vehicle is being driven as it may cause motion sickness.

When the system malfunctions

OMV033440

If the symbol shown in the illustration is displayed when using the DCM in digital mirror mode, the system may be malfunctioning. The symbol will disappear in a few seconds. Change to optical mirror mode and have the vehicle inspected by an authorized KIA dealer.

CAUTION

  • To prevent the DCM from malfunctioning.

  • Do not use detergents, such as thinner, benzene, or alcohol to clean the mirror. They may discolor, deteriorate or damage the mirror surface.

  • Do not remove, disassemble or modify the mirror and camera.

  • Do not allow an organic solvent, vehicle wax, window cleaner or glass coating to adhere to the camera. Wipe it off as soon as possible.

  • When cleaning the camera lens, wipe the camera lens with a damp soft cloth.

  • Do not rub the camera lens with force, as it may be scratched and will not be able to transmit a clear image.

  • Do not subject the camera to a strong impact as this could cause a malfunction. If this happens, have the vehicle inspected by an authorized KIA dealer as soon as possible.

  • Operating the system in the ON position could discharge the battery.

  • Do not put the antenna of wireless device near the DCM. Electronic waves from a wireless device may distort the image in DCM.

  • Do not push buttons excessively or operate the lever aggressively. It may cause a system failure or the DCM to fall out.

  • Never rotate the body of DCM by 90° or more.

  • If it is difficult to see the DCM display screen because of a strong external light, switch the mode to the conventional rearview mirror mode for better use.

DCM error icon and solution

Symptom

Likely cause

Solution

If the high temp icon () is displayed on the display right side.

The DCM is extremely hot. (The display will gradually become dimmer. If the temperature continues to increase, the Digital Center Mirror will turn off.)

Reducing the cabin temperature is recommended to reduce the temperature of the mirror. (The icon will disappear when the mirror becomes cool.)

If the icon does not disappear even though the mirror is cool, have the vehicle inspected by an authorized Kia dealer.

If the display icon has been switched to which is the display error icon.

The system may malfunction.

Change to optical mirror mode and have the vehicle inspected by an authorized KIA dealer.