How to reset auto reverse user settings

If you want to change the automatic control function of rear view mirrors to factory-default conditions, follow the steps below.

Shift the shift lever to P (Park).

  1. Choose the mirror to be adjusted by positioning the lever to L (left) or R (right).

  2. Step on the brake pedal and shift the shift lever to R (Reverse).

  3. When the downward movement of the rear view mirror is finished, press the switch ▲ to locate the mirror in the position higher than before (P, N or D).

    (Adjust the mirror in the higher position compared to its position in the driving mode)

  4. Move the gear to a position other than R (Reverse) or change the rear view mirror selector lever to the neutral position. The default settings will be applied from the next operation.

  5. You can initialize settings for the mirror on the other side by following the same procedures (1-5).

CAUTION

Follow these procedures in an orderly manner to change or initialize the auto reversing user settings.

If you move to the next step before completing the previous one, the changed angle may not be changed or initialization may not work properly.