Automatic transmission operation
The automatic transmission has 8 forward speeds and 1 reverse speed. The transmission selects the individual speeds automatically depending on the balance between the fuel economy and the power.
The first few automatic gear shifts on a new vehicle may be somewhat abrupt if the battery has been disconnected. This is normal, and the shifting sequence adjusts after the TCM (Transmission Control Module) or PCM (Powertrain Control Module) cycles through the gear shifts a few times.
For smooth operation, engage the brake pedal when shifting from N (Neutral) to a forward or reverse gear.
Automatic transmission
-
Always check the surrounding areas near your vehicle for people, especially children, before shifting the gear to D (Drive) or R (Reverse).
-
Before you leave the driver’s seat, always make sure to shift the gear to P (Park), fully apply the parking brake, and press the ENGINE START/STOP button in the LOCK/OFF position. The vehicle may move suddenly and unexpectedly if you do not take these precautions.
-
Do not use the engine brake (or shift from a high gear to a lower gear) rapidly on slippery roads. The vehicle may slip and cause an accident.
-
To avoid damaging your transmission, do not accelerate while in R (Reverse) or in any forward gear position with the brakes engaged.
-
Do not shift the gear from N (Neutral) or P (Park) to D (Drive) or R (Reverse) when the engine is above idle speed.
-
When stopped on an incline, do not use engine power to keep your vehicle stationary. Use the service brake or the parking brake.
-
Do not rely on the transmission to keep your vehicle parked on an incline. Use the parking brake.