Automatic release of EPB (if Shift by Wire (SBW) not equipped)

The EPB is released automatically under following conditions:

  • The gear is in P (Park): With the engine running, engage the brake pedal and shift the gear from P (Park) to R (Reverse) or D (Drive).

  • The gear is in N (Neutral): With the engine running, engage the brake pedal and shift the gear from N (Neutral) to R (Reverse) or D (Drive).

  • Automatic transmission:

    1. Start the engine.

    2. Fasten the driver side seatbelt.

    3. Close the driver side door, the hood, and the liftgate.

    4. Engage the accelerator pedal while the gear is in (Reverse), D (Drive), or Sports mode.

Make sure the Brake Warning Light turns OFF.

NOTE

  • You can engage the EPB even though the ENGINE START/STOP button is in the OFF position, but you cannot release the EPB.

  • Engage the brake pedal and release the parking brake manually with the EPB switch when driving downhill or backing up your vehicle.

Do not follow the above procedure when driving on flat, level ground. Your vehicle may suddenly move forward.

NOTE

If the Brake Warning Light remains illuminated after you release the EPB, have the system inspected by an authorized Kia dealer.

CAUTION

Do not drive your vehicle with the EPB applied. Doing so may cause excessive brake pad and brake rotor wear.